4-Port 10/100/1000 Base-TX PCI Express Adapter FC 5717 CCIN 5717 for sale IN DELHI

Contact info

http://ns1.makemysite.in/1372268

Phone : 08041530751

Email : info@serversrent.com

https://www.ibm.com/support/knowledgecenter/en/8246-L1C/p7hcdl/fc5717.htm
The 4-Port 10/100/1000 Base-TX PCI Express Adapter is a PCI Express (PCIe), full duplex, four ported, Gigabit Ethernet adapter that can be configured to run either port at 1000, 100, or 10 Mbps data rate. This adapter interfaces to the system through a PCIe bus and connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100 meters. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The 5717 also supports jumbo frames when running at the 1000 Mbps speed.
The adapter provides the following features:
• Supports interrupt moderation to deliver increased performance while significantly reducing central processing unit (CPU) utilization
• Allows quad-port operation in x4, x8, x16 slots, and each port operates without interfering with the other
• Each port operates without interfering with the other
• Auto-negotiation, full-duplex (half-duplex available for 10/100)
• Integrated media access control (MAC) and physical layer (PHY)
• Supports Fast EtherChannel (FEC) and Gigabit EtherChannel (GEC) when used with capable switch
• Supports IEEE 802.3ad Link Aggregation control protocol when used with capable switch
• IEEE 802.1Q VLANs, IEEE 802.3 (z, ab, u, x) flow control support, IEEE 802.1p
• TCP checksum offload -- transmission control protocol (TCP), Internet Protocol (IP) for IPv4
• TCP Segmentation Offload (TSO) / Large Send Offload (LSO)
• Bus width x4 lane; operable in x4, x8, or x16 slots
• Bus speed (x4, encoded rate) 10 Gbps unidirectional and 20 Gbps bidirectional
• EEPROM SPI and single EEPROM support
• Interrupt levels INTA and MSI (requires system and software support for MSI)
• IEEE 802.3ab
• Hardware certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
• Four RJ-45 connectors
• LEDs on each port identifying speed and link activity
• Compliant with European Union Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
FRU number
46Y3512*
*Designed to comply with RoHS requirement
I/O bus architecture
• PCIe V1.0a compliant
• Bus width x4 lane PCIe, operable in x4, x8, x16 slots
• Bus speed (x4, encoded rate) 10 Gbps unidirectional; 20 Gbps bidirectional
Busmaster
Yes
Maximum number
For the maximum adapters supported, see the PCI adapter placement topic collection for your system.
Adapter size
PCIe short form
Connector information
• Four RJ-45 ports
• Two LED adapter status indicators per port, for link activity and speed
Cabling
Customers supply their own cables. For best performance, use cables that meet Cat 5e cabling standards, or later.




For more details, contact us:
Mobile: 09886789678/080-41530751
E-mail: info@serversrent.com
Website: www.serversrent.com
info@serversrent.com
No 32, 2nd Main, 7th Cross,
Muniyappa layout, Garebhavipalya,
Bangalore-560068.

Posted on : 09/11/2018, #, Edit

It is ok to contact this poster with commercial interests.

« 4-Port 10/100/1000 Base-TX PCI-X Adapter FC 5740 1954 for sale IN DELHIIBM 5735 8Gbps 2-Port FC Adapter 10n9824 00E0806 46C7006 577D for sale IN DELHI »